 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
CHUCKS
| Charnwood W835 4 Jaw Chuck Self Centring Chuck |
Ideal for new or experienced woodturners this self centring chuck
has 4 jaws which expand and contract,
controlled by 2 tommy bars. One tommy bar is used in the chuck body
to secure the chuck to the lathe and the
second tommy bar is used in the chuck ring to adjust the jaw size. The W835 comes with 2 sets of jaws. The standard jaws can be used to expand into a recess between 50mm and 80mm diameter or grip a spigot from 68mm down to 38mm with its serrated grip. The stepped jaws allow for smaller work to be held and have a serrated grip on both sides. The woodscrew allows a large diameter work piece to be held whilst the outside is shaped and a suitable recess or spigot turned before the work piece is reversed and remounted into the jaws. Supplied with Tommy bars,allen key, woodscrew and wooden storage case. Fits any lathe with 3/4" x 16 tpi Specification: Mounting Thread 3/4" x 16 TPI, Chuck Body Diameter 100mm, Standard Jaw Expands from 50mm to 80mm, Standard Jaw Contracts from 68mm to 38mm, Stepped Jaw Expands from 22/32mm to52/62mm, Stepped Jaw Contracts from 40mm to 10mm, Weight 3kg.  |
£69.00 TEMPORARILY OUT OF STOCK |
| Charnwood W836 4 Jaw Chuck Scroll Chuck |
This high precision 4 jaw chuck uses just one T-bar to adjust the
jaws which means mounting a work piece is
very simple and you will not run out of hands. Indexed with 24 positions. Standard Chuck fits any lathe with 3/4" x 16 tpi, other thread sizes available on request please ring for details. Specification: Mounting Thread 3/4" x 16 TPI, Chuck Body Diameter 95mm, Standard Jaw Expands from 45mm to 82mm, Standard Jaw Contracts from 69mm to 32mm, Indexing Positions 24, Weight 3kg. |
£99.00
|
| Record RP3000X-1 | Special Offer, Limited Period. This
chuck offers a range of contracting & expanding solutions;
a faceplate, screw chuck & pin chuck are also included. It
is suitable for all Record lathes and other lathes that have a ¾ x
16pti thread. Five year warranty. |
£49.95 |
| Record RP2000 Mini Chuck Package |
Made from high quality steel to exacting standards, this four jaw
geared scroll chuck is the ideal choice for beginners or more
experienced turners who regularly work with small objects. Supplied
complete with four sets of jaws and a handy woodscrew
chuck. The RP2000 midi-chuck is only 62mm in diameter, facilitating easy access to workpieces, allowing fine and delicate work to be carried out more easily than with a larger chuck, which can sometimes make access to small projects, such as pens difficult. However, the smallness of this chuck does not hinder its verstility as it is capable of holding larger work and can be used to turn bowls uo to 12 inches in diameter, making it a great all round tool. Five Year Warranty. 3/4 x 16 TPI only. Jaws Supplied: General Purpose Jaws: Featuring teeth to aid internal and external gripping. These jaws have an internal grip of 24mm and an external grip of 35mm. Wide Grip Jaws: Suitable for holding larger pieces of work, these jaws also have an internal and external face to give extra grip. The internal grip is 55mm and the external grip is 24mm. Pin Jaws: Designed for holding small pices of work such as pens, these jaws feature teeth for extra hold on the external face and can hold internally pieces as small as 5mm, while the external grip is 24mm. Stepped Jaws: Featuring two diameters to allow for greater flexibility. The internal and external faces feature teeth for superior gripping. Internal grip is 3mm, while the external grip is 18mm and 31mm. |
£79.99
|
| Nova G3 Geared Scroll Chuck | Ideal for lathes up to 15" capacity, providing
high quality, geared chuck power for smaller lathes. Easy one handed
key operation in compact, precise and economic package, well suited
to the novice turner.
This chuck should not be confused with the sea of far eastern copies
of more expensive chucks. This is a high-tech,
precision engineered chuck designed specifically as an accurate and
powerful work holding system for small and intermediate lathes up
to about 15" capacity. The light, compact
design minimises loads on smaller spindles and
bearings and the standardised jaw and insert interface take the same
accessory range as the other Nova chucks,
to deliver you maximum versatility (though some of the larger jaws
are better suited to the Supernova 2 body).
Precision machined on CNC machinery the G3 is very accurate, with
a fast, precise and powerful geared action.
Built to the same exacting standards as the Supernova 2 it also shares
many features found on more expensive
chucks, such as auto jaw stop, copper composite jaw slides, a newly
designed woodworm screw and versatile
50mm jaws as standard. With a one handed, geared handle it is easy
and efficient to mount pieces and the 4 jaw system is very forgiving
of spigot and recess tolerances, making mounting much easier, even
for new turners.
Five year guarantee. Other inserts available please phone for details. |
£74.95
|
£104.98
|
||
| Super Nova 2 Chuck | Single key one-handed operation, easy to use. Excellent grip
in expansion or contraction. The chuck operates with an adaptor
to fit
the lathe, so if you change your lathe you only need a new adaptor – not
a new chuck. The chuck is supplied with a threaded adaptor, 50mm
jaws & woodworm screw. Two year warranty. When selecting 33 x
3.5mm, chuck supplied as a direct thread. |
£115 |
£115 |
||
| Supernova Package Deal | includes Supernova chuck, Pin Jaws RRP £39.95,Insert
RRP £15 and Insert Spanner RRP £12.99 |
£129 |
| Patriot Chuck |
This chuck is the latest product from Robert Sorby. The design
incorporates all the key features which turners look for in a scroll
chuck:
compact design which does not strain lathe bearings yet is ideal
for all sizes of projects, all jaws are perfectly matched so there
is no need for tiresome number matching, the single key operation
with positive location requires only the lightest touches, the key
is articulated to allow access behind large projects, true compression
angles on drive and driven gear ensure smooth operation every time,
jaw stops prevent slides from working loose, wide selection of useful
jaws give additional versatility, jaws dovetailed on inside and outside
face, additional serrated teeth on jaws give extra grip, enclosed
back protects gearing against dust, backplate is removable for easy
maintenance and cleaning Comes complete with 2" jaws and woodscrew, English instruction manual. Made in Sheffield, England. |
£129
|
| Fox Micro Chuck FX2000 | With clamping capacities from 20mm to 65mm on the inside and up
to 32mm on the outside. Featuring stepped jaws for extra versatility.
This chuck is CNC machined to very fine tolerances and is ideal for
all small and intricate work including pen turning etc. Suitable for
SIP Mini Lathe (01492). |
£42.00 |
| Versa Chuck Model "T" | The Versachuck Model "T" is an 80mm diameter, four-jaw,
self-centring, scroll chuck. A bush screwed into the rear of the
chuck body carries the spindle mounting thread, allowing the chuck
to be
adapted to fit onto a variety of lathe spindles. The model "T" is
supplied with two sets of workholding jaws, featuring a serrated
gripping surface, designed to give an excellent grip in both compression
and expansion mounting modes using parallel-sided recesses or spigots.
The chuck is operated by the use of two tommy bars which are inserted
into the holes in the chuck body and the operating body respectively. |
£59.95
|
 |
||
Barkers Lane, Snainton, Scarborough. North Yorkshire. YO13 9BG.
Home • Online Shop • Machinery • Wood Store • Products • Courses • Shows • Tiles • Enquiries • Find Us