LATHE ACCESSORIES

Planet Medium Duty Revolving Centre	Revolving centre with 60 degree point, 31mm diameter, 2 low maintenance deep grove ball races with low friction shields.	1MT	£22.90
		2MT	£22.90
Planet 4 Prong Piloted Drive Centre (Counterbore)	1" diameter 4 head relieved behind flutes to prevent binding.Supplied with interchangeable point, pilot and hex key.		£19.35
Planet Hollow Centre 2MT	5/8" head with 5/16" bore with removable centre point for long hole boring,may also be used as a tail centre when there is a risk of wood splitting.		£18.50
Planet 3/8" x 4 Prong Drive Centre	Intepral points will not work loose and even the smallest centre may be removed from the headstock with an extractor ring.	1MT	£12.60
Planet 5/8" x 2 Prong Drive Centre	Two prong centres may be used where the end of the spindle is not properly squared off or on particularly hard timber.	2MT	£12.60
Planet 5/8" x 4 Prong Drive Centre	Four prong centres provide better contact for driving and less risk of splitting but require the spindle end to be squared off.	2MT	£12.60
Planet 1" x 4 Prong Drive Centre		2MT	£13.50
Planet Centre Finder	A robust plastic tool used to mark the centre of work up to approximately 8" (200mm) diameter. May also be used on square section.		£2.90
Planet 6" Outside Caliper	Ideally suited to the requirements of the woodturner. The screw adjustment ensures that the dimension set cannot be accidently moved.		£5.55
Planet 6" Dividers	Screw adjustment for positive setting.		£5.55
Nova 10 in 1 Gauge 10051	This versatile and handy tool is exclusive to Nova. An essential accessory. This gauge contains many of the useful measuring and gauging functions used in the wider workshop. Features include: Angle checker for knives, carving tools, chisels and planer blades. Diameter gauge. Centre finder. Dowel gauge. Furniture angle gauge. Ruler scale. Many other functions are also included. The complete 10 in 1 tool. Most comprehensive workshop gauge. Only one gauge available for Nova Chuck jaw dovetail measurement. Easy to use. Heavy duty polycarbonate.		£9.99
Record 2 1/2" Woodscrew Chuck CWA61	A verstatile popular form of chucking, from the most delicate goblets up to 12" wet wood bowls. 3/4 x 16 TPI		£19.99
Record 1 1/2" Woodscrew Chuck CWA62	A smaller version of the CWA61, this screw chuck can be used up to 7 1/2" wet wood bowls. 3/4 by 16 TPI		£12.99
Record Live Centre CWA93	The revolving action eliminates scoring of the timber. Precision machined with a sealed for life bearing, resists sideways and downward thrust pressures to enable out of balance timbers to be worked on without preparation. No 1 morse taper.		£19.99
Record Long Hole Boring Kit CWA131	Complete with CWA92 cup centre,counter boring tool and CWA111 5/16" x 30 shell auger. Suitable for all Record Power lathes plus other lathes with 1 MT.		£29.99
Record 1/2" Drill Chuck CWA140/160	Drill chuck and No 1 MT is designed to operate in both the head and tailstock. Use with standard boring bits or for large diameters expansive cutters can be used.		£24.99

New Record Cam Lock Upgrades

The Cam Lock toolrest and tailstock can be retro fitted to earlier models as an upgrade. The cam lock upgrade eliminates the need for awkward locking handles. Simply release the cam lock to move the toolrest and tailstock along the bed bars and lock in position.

DML/C Cam Lock Toolrest Upgrade for DML36SH	Upgrade your DML36SH-MK11 to the DML36-CAM with the cam lock handles for easy adjustments along the bed bars.	£29.99 Saving £10 on RRP
CLO/C Cam Lock Toolrest Upgrade for CL Lathes	Upgrade your CL lathe to the CL-CAM with the cam lock handles for easy adjustments along the bed bars.	£39.95 Saving £10 on RRP
CLO/T Cam Lock Tailstock Upgrade for CL Lathes	Upgrade your CL lathe to the CL-CAM with the cam lock handles for easy adjustments along the bed bars.	£49.95 Saving £10 on RRP

Robert Sorby Steb Centre

The Stebcentre lathe drive has the razor sharp serrated teeth to grip the work piece, without the need for pre-marking the wood with the drive prior to putting it into the lathe.
The greatest benefit of the Stebcentre is the spring-loaded centre point. Pressure can be applied so the wood can be driven with only the tip of the teeth biting,so that the turner can practice taking cuts with a Skew for example with the knowledge that if dig-in occurs the wood will stop turning without any danger.When more confidence is achieved or for the more advanced turner the tailstock can be wound in so that the teeth give an extremely positive drive.

Robert Sorby Steb Drive

The Steb Drive uses the same innovatively designed head as the original Stebcentre.The Steb Drive is designed to fit into the majority of 4 jaw woodturning chucks available.It has a positive and secure location utilising the flats of the spigot.

Robert Sorby

LATHE BELTS

To fit SIP 01360 Lathe, Nutool NWL/MC 900	£6.50
To fit SIP 01490 3/4 HP Lathe	£7.00
To fit SIP 01492 Mini Lathe	£3.50
To fit Record DML-CL1-CL2	£10.00
To fit Record CL3	£14.99
To fit Record CL4	£14.99
To fit Fox F46-251 Midi Lathe	£12.50